MacDon HC10, Original Instruction

Page: 51 / 242

215126
29
Revision A
1005116
A
B
B
Figure 3.30: Conditioner and Lifting Brackets
2. Attach chain (A) to lifting brackets (B) on the conditioner
and secure the chain to the lifting device.
3. Lift the conditioner off the shipping pallet and set on the
ground in the upright position.
1002662
A
B
Figure 3.31: Conditioner Support
4. Retrieve the following parts from the finishing package
shipped with MD #B4798:
•
Support
Retrieve the following parts from the hardware bag shipped
with MD #B4798:
•
Hairpin
Install support (A) in slot in base at lower right end of
conditioner. Secure support with hairpin (B).
5. Remove shipping blocks if present.
1031003
A
B
E
D
C
Figure 3.32: Lift Arm
–
Left Side
6. Remove bolt and nut (A) attaching lift arm (B) to
bracket (C).
7. Loosen nut (D) enough to rotate bracket (C).
8. Remove L-pin (E) securing lift arm (B) to the conditioner.
NOTE:
Rotate pin (E) to align the key-hole slot.
9. Remove lift arm (B).
UNLOADING AND ASSEMBLY