MacDon HC10, Original Instruction

Page: 77 / 242

215126
55
Revision A
1005041
A
A
Figure 4.4: Forming Shield
5. Remove two lynch pins (A) securing the forming shield to
the conditioner pins and the remove shield.
1030912
A
C
B
D
E
Figure 4.5: Hydraulic Hoses
A - Case Drain B - Conditioner Motor Pressure
C - Deck Motor Return D - Deck Motor Pressure
E - Conditioner Motor Return
6. Disconnect the five HC10 hydraulic hoses from the header
at the following locations:
•
Case drain hose (A)
•
Conditioner motor pressure hose (B)
•
Deck motor return hose (C)
•
Deck motor pressure hose (D)
•
Conditioner motor return hose (E)
1002658
A
Figure 4.6: Conditioner
–
Right Side
7. Remove nut (A) and the carriage bolt that attach the
conditioner to the lower right of the header.
OPERATION