MacDon HC10, Original Instruction

Page: 33 / 242

215126
11
Revision A
2.2 Specifications
NOTE:
Specifications and design are subject to change without notice or obligation to revise previously sold units.
Item
Specification
Frame and Structure
Total Weight (estimated) 770 kg (1700 lb.)
Carrier (North America only) MacDon M150, M155, M155 E4 , and M200 Self-Propelled Windrowers
Carrier (Export only) MacDon M100, M105, M150, M155, and M200 Self-Propelled Windrowers
Header
MacDon double-knife (timed only) drive D60, D65, and D1 Series Draper
Headers
Manual Storage In windrower cab
Drives
Main Conditioner 80 cc (4.9 cu in.) hydraulic motor
Feed Deck 65 cc (4.0 cu in.) hydraulic motor with 921 psi relief
Connections
Flat-faced quick attach couplers
–
connect under pressure
Normal Operating
Pressure Conditioner 17.0
–
20.7 MPa (2500
–
3000 psi)
Feed Deck 4.1 MPa (600 psi)
Conditioner
Drive
Hydraulic motor to belt-driven roll to open timing gear system
Header Size 4.6 m (15 ft.)
6.1 m (20 ft.) and
7.6 m (25 ft.)
9.1 m (30 ft.)
Roll Speed 772
–
977 rpm 720
–
874 rpm 695
–
927 rpm
Feed Draper Speed 437
–
553 fpm 407
–
495 fpm 393
–
525 fpm
Roll Type Intermeshing steel bars
Roll Diameter
233 mm (9.17 in.) / 168.4 mm (6.63 in.) OD tube
Roll Length 1830 mm (72 in.)
Swath Width 915
–
2540 mm (36
–
102 in.)
Forming Shields Header-mounted tractor-supported adjustable forming shield system
NOTE:
To avoid excessive vibration and poor performance, the HC10 Hay Conditioner should NOT be attached to single-knife drive
headers. The HC10 Hay Conditioner is NOT intended for use with the M205 Self-Propelled Windrower, and is for use with
the M100 and M105 Self-Propelled Windrowers ONLY in markets outside of North America.
PRODUCT OVERVIEW