MacDon HC10, Original Instruction

Page: 74 / 242

215126
52
Revision A
4.2 Operational Safety
1003720
Figure 4.1: Safety around Windrower
CAUTION
Follow these safety precautions:
•
Follow all safety and operational instructions given in your
windrower and header operator's manuals. If you do not
have a windrower and/or header manual, get one from your
Dealer and read it thoroughly.
•
Never start or move the machine until you are sure all
bystanders have cleared the area.
•
Stop the engine and remove the key before adjusting or
removing plugged material from the machine.
•
Check for excessive vibration and unusual noises. If there is
any indication of trouble, shut down the engine and inspect
the machine. Follow proper shutdown procedure. Refer to
4.2.1 Shutting down the Machine, page 52 .
•
Operate only in daylight or good artificial light.
4.2.1 Shutting down the Machine
Before inspecting the machine, follow these steps to shut it off:
1. Return GSL to N-DETENT and center steering wheel to lock.
2. Disengage header drives.
3. Shut down the engine, and remove the key from the ignition.
4. Wait for all movement to stop.
5. Dismount and engage lift cylinder safety props on windrower lift legs before inspecting raised machine.
OPERATION