MacDon HC10, Original Instruction

Page: 12 / 242

Section Summary of Change Internal Use
Only
5.1 Preparation for Servicing, page 75 Replaced the following CAUTION with the following
DANGER:
•
CAUTION: To avoid personal injury, before servicing
hay conditioner or opening header drive covers:
•
DANGER: To avoid bodily injury or death from
unexpected start-up or fall of a raised machine, always
stop engine and remove key before leaving the
operator
’
s seat, and always engage safety props
before going under the machine for any reason.
Tech Pubs
5.7.1 Adjusting Drive Belt Tension, page 81
•
Step 1, page 81
•
Step 2, page 81
Added safety steps:
•
Shut down the engine, and remove the key from
the ignition.
•
Engage the header safety props.
Tech Pubs
5.7.1 Adjusting Drive Belt Tension, page 81
•
Step 4, page 81 to Step 8, page 82
Revised steps and associated illustrations to include new
conditioner drive motor MD #159661. ECN 57949
5.7.2 Adjusting Drive Belt Pulley Alignment,
page 82
•
Step 1, page 82
•
Step 2, page 82
Added introductory safety steps and the following
DANGER:
•
To avoid bodily injury or death from unexpected start-
up or fall of a raised machine, always stop engine and
remove key before leaving the operator
’
s seat, and
always engage safety props before going under the
machine for any reason.
Tech Pubs
5.7.2 Adjusting Drive Belt Pulley Alignment,
page 82
•
Refer to NOTE below Step 6, page 83
Revised NOTE and associated illustration to include new
conditioner drive motor MD #159661.
ECN 57949
5.7.3 Checking and Adjusting Drive Belt
Tracking, page 84
•
Step 1, page 84
•
Step 2, page 84 .
Added safety steps:
•
Shut down the engine, and remove the key from
the ignition.
•
Engage the header safety props.
Tech Pubs
5.7.3 Checking and Adjusting Drive Belt
Tracking, page 84
•
Step 4, page 84 to Step .
Revised steps and associated illustrations to include new
conditioner drive motor MD #159661. ECN 57949
5.7.4 Removing Drive Belt, page 85
•
Step 1, page 86
•
Step 2, page 86
Added safety steps.
•
Shut down the engine, and remove the key from
the ignition.
•
Engage the header safety props.
Tech Pubs
5.7.4 Removing Drive Belt, page 85
•
Refer to NOTE below Step 6, page 86
Revised NOTE and associated illustration to include new
conditioner drive motor MD #159661. ECN 57949
5.7.5 Installing Drive Belt, page 86
•
Step 1, page 86
Added introductory safety steps. Tech Pubs
215126
x
Revision A