MacDon HC10, Original Instruction

Page: 44 / 242

215126
22
Revision A
3.4.2 Installing Deck Brackets
–
D60, D65, and D130
To install the deck brackets onto the header, follow these steps:
1005095
A
B
Figure 3.14: Lower Deck Brackets
1. Retrieve the following parts from the loose parts package
shipped with MD #B4799:
•
Left bracket
•
Right bracket
•
Two 1/2 in. flange nuts
•
Two 1/2 x 1 1/4 in. carriage bolts
Install two lower brackets (A) and onto the inside of both
center header legs with two 1/2 x 1 1/4 in. carriage bolts
and two 1/2 in. flange nuts (B) in each bracket.
1031036
A
B
E
C
D
Figure 3.15: Upper Bracket
–
D60/D65 4.6 m (15 ft.)
Header Shown
2. Retrieve the following parts from the loose parts package
shipped with MD #B4799:
•
Right bracket
•
One spacer
•
Two 5/8 in. flange nuts
•
One 5/8 x 7 1/2 in. hex bolt
Install right upper bracket (A) and spacer (B) on the right
center leg as shown in the illustration at right, and install
one 5/8 in. flange nut (C).
NOTE:
On headers with a sheet metal hose cover, install bolts from
the outboard side.
3. Install 5/8 x 7 1/2 in. hex bolt (D) through the bracket and
spacer and secure with a one 5/8 in. flange nut (E).
4. Tighten both nuts (C) and (E).
1005098
A
B
Figure 3.16: Upper Bracket
–
Left
5. Retrieve the following parts from the loose parts package
shipped with MD #B4799:
•
Left bracket
•
One spacer
Install left upper bracket (A) and spacer (B) onto the
inboard side of left center leg as shown in the illustration
at right.
UNLOADING AND ASSEMBLY