MacDon HC10, Original Instruction

Page: 15 / 242

Section Summary of Change Internal Use
Only
•
MD #159704 supersedes MD #133838
6.15 Feed Deck and Pan, page 128 Revised the parts list as follows due to changes in design:
•
Removed MD #135481. A seal kit is no longer offered
for MD #135213
ECN 47629
6.15 Feed Deck and Pan, page 128 Revised the parts list as follows:
•
Added
“
(Faster)
”
to the description of MD #135386
”
.
Added a footnote regarding the Parker Hannifin
coupler.
•
Added
“
(Faster)
”
to the description of MD #111978
”
.
Added a footnote to this part.
ECN 58441
6.15 Feed Deck and Pan, page 128 Corrected the parts list as follows:
•
Changed MD #135630 toMD #49671.
•
Changed MD #135626 toMD #30669.
Tech Pubs
6.16 Mounting Brackets, page 132 Revised the parts list and illustration as follows due to
changes in design for D115, D120, and D125 headers
equipped with a double-knife and single reel:
•
Added MD #159734
•
Added MD #113611
•
Added additional MD #50225
ECN 58813
6.16 Mounting Brackets, page 132
Corrected the location of one nutMD #50225. and bolt
MD #18523. on the parts illustration.
Tech Pubs
7.1.8 Tapered Pipe Thread Fittings, page
145
•
Step 4, page 145
Added
“
flats from finger tight (FFFT)
”
to step. Tech Pubs
•
7.3.1 D1 Series Header
–
4.6
–
9.1 m
(15
–
30 ft.), Timed Double Knife, Single
Reel, Hydraulic Deck Shift, HC10 (Motor
MD #159661), and Upper Cross Auger,
page 147
•
7.3.2 D1 Series Header
–
4.6
–
9.1 m
(15
–
30 ft.), Timed Double Knife, Single
Reel, Hydraulic Deck Shift, and HC10
(Motor MD #159661), page 151
•
7.3.3 D1 Series Header
–
9.1 m (30 ft.),
Timed Double Knife, Double Reel,
Hydraulic Deck Shift, HC10
(Motor MD #159661), and Upper Cross
Auger, page 155
•
7.3.4 D1 Series Header
–
9.1 m (30 ft.),
Timed Double Knife, Double Reel,
Hydraulic Deck Shift, and HC10
(Motor MD #159661), page 159
Created new hydraulic schematics to replace all previous
schematics and to show more header configurations
compatible with the HC10 (motor MD #159661). Tech Pubs
215126
xiii
Revision A