MacDon HC10, Original Instruction

Page: 27 / 242

215126
5
Revision A
1.4 Maintenance Safety
1000009
Figure 1.8: Safety around Equipment
To ensure your safety while maintaining machine:
•
Review the operator
’
s manual and all safety items before
operation and/or maintenance of the machine.
•
Place all controls in Neutral, stop the engine, set the park
brake, remove the ignition key, and wait for all moving parts
to stop before servicing, adjusting, and/or repairing.
•
Follow good shop practices:
–
Keep service areas clean and dry
–
Be sure electrical outlets and tools are properly grounded
–
Keep work area well lit
1008958
Figure 1.9: Equipment NOT Safe for Children
•
Relieve pressure from hydraulic circuits before servicing
and/or disconnecting the machine.
•
Make sure all components are tight and that steel lines,
hoses, and couplings are in good condition before applying
pressure to hydraulic systems.
•
Keep hands, feet, clothing, and hair away from all moving
and/or rotating parts.
•
Clear the area of bystanders, especially children, when
carrying out any maintenance, repairs, or adjustments.
•
Install transport lock or place safety stands under the frame
before working under the machine.
•
If more than one person is servicing the machine at the
same time, be aware that rotating a driveline or other
mechanically-driven component by hand (for example,
accessing a lubricant fitting) will cause drive components in
other areas (belts, pulleys, and knives) to move. Stay clear of
driven components at all times.
1000004
Figure 1.10: Safety Equipment
•
Wear protective gear when working on the machine.
•
Wear heavy gloves when working on knife components.
SAFETY