MacDon HC10, Original Instruction

Page: 55 / 242

215126
33
Revision A
3.7 Attaching Hydraulics
The procedure for attaching hydraulics is different for 4.6 m (15 ft.) draper headers.
•
If attaching a 4.6 m (15 ft.) header, refer to 3.7.1 Attaching Hydraulics
–
4.6 m (15 ft.) Headers, page 33 .
•
If attaching any other size header, refer to 3.7.2 Attaching Hydraulics
–
All Headers Except 4.6 m (15 ft.), page 36 .
3.7.1 Attaching Hydraulics
–
4.6 m (15 ft.) Headers
To attach hydraulics to a 4.6 m (15 ft.) draper header, follow these steps:
1005111
A
Figure 3.42: Return Hose
–
D Series Shown, D1 Series
Similar
1. Disconnect return hose (A) at elbow on motor.
1005106
A
B
C
Figure 3.43: Check Valve and Hoses
–
D Series Shown,
D1 Series Similar
2. Install check valve tee (A) on elbow and reconnect return
hose (B) to tee (A).
3. Connect feed draper return line (C) from the conditioner
hose package onto the check valve.
UNLOADING AND ASSEMBLY