MacDon HC10, Original Instruction

Page: 50 / 242

215126
28
Revision A
1030912
A
C
B
D
E
Figure 3.28: Hydraulic Hoses
A - Case Drain B - Conditioner Motor Pressure
C - Deck Motor Return D - Deck Motor Pressure
E - Conditioner Motor Return
9. Connect the five HC10 hydraulic hoses to the header at the
following locations:
•
Hose (A) with small male quick-disconnect from motor
to header
•
Hose (B) with large female quick-disconnect from motor
to to header
•
Hose (C) with small female quick-disconnect from deck
to to header
•
Hose (D) with small female quick-disconnect from
motor to deck
•
Hose (E) with large female quick-disconnect from
header to motor
3.6.2 Installing Conditioner
–
Windrower Method
To install the conditioner using the windrower method, follow these steps:
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, always stop engine and remove
key before leaving the operator
’
s seat, and always engage safety props before going under the machine for any reason.
1002644
A
Figure 3.29: Header Stand
1. Lower the header stand to mid-position (A).
UNLOADING AND ASSEMBLY