MacDon HC10, Original Instruction

Page: 52 / 242

215126
30
Revision A
1031013
A
B
C
D
E
Figure 3.33: Conditioner
–
Left Side
10. Position lift arm (A) as shown and secure with latch (D).
11. Reattach lift arm (A) to bracket (B) using nut and bolt (C).
12. Tighten hardware (E) to secure bracket (B) to the
conditioner. Tighten hardware (C) to secure lift arm (A) to
bracket (B).
13. Repeat Step 6, page 29 to Step 12, page 30 for the other lift
arm.
1002663
A
Figure 3.34: Windrower Arms
14. Position the windrower arms in the lift arm pockets of
the HC10.
15. Shut down the engine, and remove the key from
the ignition.
16. Engage the header safety props.
17. Insert L-pins (A) for safety.
1002662
A
B
Figure 3.35: Conditioner Stand
18. Remove support (A) and store with hairpin (B) in the
toolbox.
19. Lift the conditioner and position it into the header opening
from the rear.
UNLOADING AND ASSEMBLY