MacDon HC10, Original Instruction

Page: 46 / 242

215126
24
Revision A
3.5 Installing the Feed Deck
To install the feed deck, follow these steps:
1005113
A
Figure 3.19: Feed Deck
1. Retrieve feed deck assembly (A) from MD #B4799. Slide
feed deck (A) under the header opening from the rear. The
deck drive motor faces aft.
1002988
A
B
Figure 3.20: Feed Deck
2. Set the front of deck (A) onto the rock grate and slide the
feed deck forward until locating pins (B) reach the pockets
on the rock grate.
3. Lift the rear of the feed deck so the mounts on the deck
clear the brackets on the leg, and then slide the deck
forward until the mounting pins are fully positioned inside
the pockets.
1030901
A
Figure 3.21: Feed Deck
–
Left Side
4. Retrieve the following parts from the loose parts package
shipped with MD #B4799:
•
Two 1/2 in. flange nuts
•
Two 1/2 x 1 1/4 in. carriage bolts
Install one 1/2 in. flange nut (A)and one 1/2 x 1 1/4 in.
carriage bolt at the rear left mounting bracket.
UNLOADING AND ASSEMBLY