214778
70
Revision A
1024666
A
B
Figure 5.39: Left Endshield Latch Assembly
2.
Loosen the three bolts (A) on latch assembly (B).
3.
Adjust latch assembly (B) to achieve the desired gap
between the front end of the shield and the header frame.
Refer to Table
for the recommended endshield
gap at various temperatures.
4.
Tighten the three bolts (A) on the latch assembly.
1025332
A
B
A
A
A
Figure 5.40: Left Endshield Support Tube on
D1X Header
5.
Tighten the four bolts (A) on support tube bracket (B).
NOTE:
D1X header shown in illustration. D1XL header similar.
6.
Close endshield.
Closing the endshield:
1012300
A
B
Figure 5.41: Left Endshield
1.
Disengage lock (B) to allow endshield to move.
2.
Insert front of endshield behind hinge tab (A) and into
divider cone.