214778
29
Revision A
1020151
A
B
C
D
E
F
Figure 3.32: Draper/Reel Multicoupler
6.
Retrieve draper drive and reel control multicoupler (A) from
hose management arm.
7.
Push knob (B) on hydraulic receptacle and pull handle (C)
fully away from windrower.
8.
Open cover (D) and position coupler onto receptacle. Align
pins in coupler with slots in handle (C) and push handle
toward windrower so that coupler locks onto receptacle
and knob (B) snaps out.
9.
Remove cover from electrical connector (E), push electrical
connector onto receptacle, and secure by turning collar on
electrical connector clockwise.
10. Remove hose quick-disconnect (F) from storage location
and connect to receptacle on frame.
NOTE:
Hose quick-disconnect (F) is only present on M1240
machines configured for draper headers and on M1170
machines configured for rotary disc headers.
1020152
A
B
C
D
Figure 3.33: Knife/Reel Drive Multicoupler
11. Retrieve knife and reel drive multicoupler (A) from hose
management arm.
12. Push knob (B) on hydraulic receptacle and pull handle (C)
fully away from windrower.
13. Open cover (D) and position coupler onto receptacle. Align
pins in coupler with slots in handle (C) and push handle
toward windrower so that coupler locks onto receptacle
and knob (B) snaps out.
1015479
A
B
Figure 3.34: Platform
14. Push latch (B) to unlock platform (A).
15. Push the platform towards the cab until it stops and latch
engages.