![background image](http://html2.mh-extra.com/html/macdon/d1x-series/d1x-series_unloading-and-assembly-instructions_3273904083.webp)
214778
77
Revision A
Chapter 6:
Running up the Header
To run up the header, follow these steps:
CAUTION
Clear the area of other persons, pets etc. Keep children away from machinery. Walk around the machine to be sure no
one is under, on, or close to it.
CAUTION
Before investigating an unusual sound or attempting to correct a problem, shut off engine, engage parking brake, and
remove key.
1.
Start the windrower and run header for 5 minutes, watching and listening
FROM THE OPERATOR
’
S SEAT
for binding or
interfering parts.
NOTE:
Reels and drapers will not operate until oil flow fills the lines.
2.
Run header for an additional 10 minutes at operating speed, watching and listening
FROM THE OPERATOR
’
S SEAT
for
binding or interfering parts.
3.
Shut down the windrower and remove key.
4.
Perform the run-up check as listed on the Predelivery Checklist (yellow sheet attached to this instruction)