214778
59
Revision A
5.6
Adjusting Draper Tension
WARNING
To avoid bodily injury or death from unexpected start-up or fall of raised machine, always stop engine, remove key, and
engage safety props before going under machine for any reason.
1008647
A
Figure 5.17: Left Side Tension Adjuster Shown
–
Right
Side Opposite
1.
Ensure the white indicator bar (A) is at the halfway point in
the window.
WARNING
Check to be sure all bystanders have cleared the area.
2.
Start the engine and fully raise the header.
3.
Shut down the windrower and remove the key from the
ignition.
4.
Engage the header safety props.
1008417
A
Figure 5.18: Drive Roller
5.
Ensure the draper guide (the rubber track on the underside
of the draper) is properly engaged in the groove (A) on the
drive roller.
1008418
A
B
Figure 5.19: Idler Roller
6.
Ensure the idler roller (A) is between the draper guides (B).