214778
15
Revision A
1008914
A
Figure 2.18: Anti-Rotation Brace
6.
Remove reel anti-rotation brace (A) from between reel and
endsheet.
1026969
A
C
B
Figure 2.19: Endsheet Shipping Support
7.
At the left side of the header, cut and remove the wire (A)
securing the endshield to the panel. Repeat at the
opposite side.
8.
Loosen the three nuts (B) securing the shipping support to
the endsheet.
9.
Slide shipping support (C) backward to remove.
10. Tighten nuts (B).
1017803
A
B
Figure 2.20: Endsheet Shipping Support
11. At the right side of the header, loosen the two nuts (A)
securing the shipping support (B) to the endsheet.
12. Slide shipping support (B) backward to remove.
13. Tighten nuts (A).