214778
44
Revision A
4.5
Installing Crop Dividers
One crop and two divider rods are stored on the right inboard side of the endsheet; the other crop divider is stored on the
left inboard side of the endsheet.
1024477
A
B
C
D
Figure 4.30: Divider Rods on Endsheet
1.
Loosen the bolt at location (A) on the lock tab securing the
divider rods (B) to the storage bracket (C).
2.
Remove divider rods (B) from the storage bracket (C) and
pull away from the lower divider rod support (D). Set aside
for installation later.
3.
Return lock tab to its original position and tighten bolt at
location (A).
1008371
A
B
C
Figure 4.31: Crop Divider on Endsheet
4.
Support the crop divider, remove shipping wire (A) at front
end, and remove bolt (B).
5.
Remove bolt and washer (C).
1007923
A
B
Figure 4.32: Crop Divider Lugs and Endsheet Slots
6.
Position crop divider as shown and insert lugs (A) into
slots (B) in endsheet.