![background image](http://html2.mh-extra.com/html/macdon/d1x-series/d1x-series_unloading-and-assembly-instructions_3273904049.webp)
214778
43
Revision A
1009261
A
Figure 4.28: Hardware Bag Right Reel
5.
Remove bag of hardware (A) from tine bar. It contains
hardware for cam links and endshields.
1024826
A
B
C
D
B
Figure 4.29: Bar Crank Attachment Holes and Link
Alignment
6.
Rotate tine bar crank (A) and position link (B) so
attachment holes in bar crank are aligned with hole in link.
7.
Install bolt (C) in link and position shim (D) on bolt so that
shim is between link and tine bar crank.
NOTE:
Bolts are precoated with Loctite
®
, so no further locking
method is required.
8.
Realign link (B) and tine bar crank (A) and thread in bolt (C).
9.
Repeat for remaining tine bars and torque bolts to 165 Nm
(120 lbf·ft).