214778
24
Revision A
1015851
A
B
Figure 3.18: HPT Display
5.
In the windrower cab, press scroll knob (A) on HPT to
display the QuickMenu system.
6.
Rotate scroll knob (A) to highlight the HEADER FLOAT
symbol (B), and press scroll knob to select.
1019607
A
Figure 3.19: HPT Display
7.
On Float Adjust page, press soft key 3 (A) to remove float.
1018911
A
B
C
D
E
F
Figure 3.20: GSL Switches
A - Reel Down
B - Reel Up
C - Header Tilt Down
D - Header Tilt Up
E - Header Down
F - Header Up
8.
Self-Aligning Hydraulic Center-Link:
a.
Press HEADER DOWN switch on the ground speed lever
(GSL) to fully retract header lift cylinders.
b.
Press REEL UP switch on the GSL to raise the center-link
until the hook is above the attachment pin on the header.
IMPORTANT:
If the center-link is too low, it may contact the header as the
windrower approaches the header for hookup.
