214778
49
Revision A
Chapter 5:
Performing Predelivery Checks
This machine has been set at the factory and should not require further adjustments; however, the following checks will
ensure your machine provides maximum performance. If adjustments are necessary, follow the procedures in this chapter.
WARNING
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key before
adjusting machine.
IMPORTANT:
To avoid machine damage, check that no shipping material has fallen into the machine.
1.
Perform the final checks as listed on the
Predelivery Checklist
(yellow sheet attached to this instruction
–
) to ensure the machine is field-ready. Refer to the following pages for detailed instructions as
indicated on the Checklist. The completed Checklist should be retained by either the Operator or the Dealer.
5.1
Checking Tire Pressure
–
Transport and Stabilizer Wheels
Check tire inflation pressure. If necessary, inflate tires according to the following table:
Table 5.1 Tire Inflation Pressure
Tire
Size
Pressure
Goodyear Wrangler RT/S
205/75 R15
276 kPa (40 psi)
Carlisle and Titan
ST205/75 R15
448 kPa (65 psi)
IMPORTANT:
Do
NOT
exceed maximum pressure specified on tire sidewall.