35
DL30-G USERS MANUAL EM-8571-G Rev.2
3.6 I/O setting
Configure the I/O setting. Use DL30GCFG to configure the setting.
(1) Turn [Configuration Select SW] to the [DL30] side.
(2) Connect the device to a PC in which DL30GCFG is installed, and start up DL30GCFG.
(3) Click [Download from device] button in the initial window to display [Confirm access mode] window.
(4) Check that the device is correct, and click [Connect] button.
(5) After the setting information is downloaded from the device, the [Configuration] window is displayed.
(6) Click [Input/Output] button to open the [Input/Output] window.
DL30 RUN
LOGGING
SD CARD
MAINT
PWR
RUN
ERROR
CFG
DPX
LNK
LOGGING
SD CARD
DL30
2
I/O
On
4
3
1
U(
+
)
NC
V(-)
FE
DL30
I/O
Configuration
Select SW
Configuration
Connector
Initial Window
Configuration
Confirm access mode
3. Click
2. Click
1. Click
Input/Output