276
DL30-G USERS MANUAL EM-8571-G Rev.2
8.1.9 Internet
Problem faced
Checks to be done
Method of handling
Unable to connect to the
Internet (provider).
Does the information used to
connect to the provider match the
setting in the router (User name,
password, etc.)?
Check the setting of the router related to the
provider. (See the provider information and the
User Manual of the router)
If a mobile router is being used, is
the signal weak?
Check the signal strength.
Have the IP address and default
gateway of the DL30-G been cor-
rectly set?
Check the IP address and default gateway set-
ting for the DL30-G.
➔
Unable to display the Web
browser view via the Internet.
Is the URL correct?
Check the fixed IP address or domain name of
the WAN as per the agreement with the provider.
(See the contents of the agreement with the
provider)
If the IP address of the DL30-G is
manually set, is the port open?
Set the IP address and port address of the
DL30-G (Initial setting: 80) manually in the NAT
setting of the router.
(See the User Manual of the router)
If the IP address of the DL30-G is
set as [Automatic setting (DHCP)],
has the IP address been assigned
by the router?
Obtain the IP address from the router and set
the IP address and port address (Initial setting:
80) from the NAT setting manually.
(See the User Manual of the router)
8.1.10 Web server
Problem faced
Checks to be done
Method of handling
Unable to manipulate MA,
MD, AO, DO, and/or GDO on
the Data display view.
Is the relevant channel selected in
the [Channel control function set-
ting]?
Select the relevant channel in the [Channel con-
trol function setting] from the Web server setting.
➔
3.11.4 Login ID / password / port address set-
Have you not logged in to the web
server in the browsing mode?
Log in to the web server using the DL30GCFG
remote access authorization login ID and pass-
word.
➔
3.3.4 Enabling configuration via network
Is the [Control on browser] for the
relevant channel not set to [Dis-
able]?
Enable the [Control on browser] setting for the
relevant output channel.
Is the relevant channel not specified
for I/O mapping function?
Channels used for I/O mapping cannot be ma-
nipulated. Remove the setting.
