120
DL30-G USERS MANUAL EM-8571-G Rev.2
I/O mapping (AO)
I/O mapping function is used to connect between AI and AO, DI and AO, MA and AO, and MD and AO, so that
an input is copied as an output in the remote location.
(1) Click [I/O mapping] button in the [AO setting] window to display [AO I/O mapping].
(2) Select the [Mode] from [None], [Analog], and [Discrete].
AO setting
AO I/O mapping
1. Click
2. Select
(3) Set [Type] and [CH] referring to the following tables.
■
Mapping an analog input
Parameter
Description
Type
Choose AI or MA.
CH
Specify an analog input channel.
■
Mapping a discrete input
Assign a discrete input to each bit of AO (0 to 15 bit).
Parameter
Description
Type
Choose among 0 (fixed value) / 1 (fixed value) / DI / MD.
CH
Specify a discrete input channel for DI and MD.
Use the above procedure to set all the CHs.
The CH setting for which the setting is complete in the [Analog output (AO)] window can also be copied to
other CHs and only the required portions can be edited.
➔
NOTES
Channels assigned for I/O mapping function cannot be controlled on the web browser or used
for alarm output. Any setting for the web browser control or the alarm output is invalid.
