M-system DL30-G, User Manual

Page: 200 / 337

200 DL30-G USERS MANUAL EM-8571-G Rev.2
(4) Set the parameters by referring to the table below.
Parameter Description
Process name Set a name of the process using up to 32 characters
Channels 1 to 5
Type
When setting digital data, select the signal type as follows.
Channel 1: DI or MD
Channels 2 to 5: None / DI / MD
In the 'Color' and 'Display comment' fields of OFF state for Channel 1, those of the chan-
nel set for Channel 1 are automatically displayed.
In the 'Color' and 'Display comment' fields of ON state for each of Channels 1 to 5, those
of the channel set for each of Channels 1 to 5 are automatically displayed.
➔
3.6.3 Discrete input (DI) > Basic setting (DI)
➔
3.6.6 Digital function register (MD) > Basic setting (MD)
When all the channels are OFF, 'Color' and 'Display comment' of OFF state of Channel 1
are displayed on the browser view.
Channels 1 to 5 Select the channel to monitor.
Digital display (main) Type
Select from None, AI, PI, and MA.
Configurable when DI or MD is selected for Channel 1.
Digital display (main) CH Select the channel to display data value.
Digital display (sub1) Type Select from None, AI, PI, MA, DI, and MD.
Digital display (sub1) CH Select the channel to display data value.
(5) The status of data set for Channel 1 is recorded every minute (00 seconds of DL30-G clock data) for 48
hours and represents the data in a Gantt chart.
➔
4.8.1 Display contents > Gantt chart
Web Browser View
Andon screen
Gantt chart
Process name
Display comment
Color
Process name
Display comment
CH name, current value, engineering unit
of Digital display (main)
Digital display (sub)
CH name, current value, engineering
unit of Digital display (main)
CAUTION
• Gantt chart will be cleared when the type, channel, display comment, or engineering unit of
any of Channels 1 to 5 has been changed.
• Gantt chart can also be cleared on DL30GCFG.
➔
6.1.2 Maintenance menu (DL30GCFG) > Initializing internal memory