94
DL30-G USERS MANUAL EM-8571-G Rev.2
(2) Configure the following basic parameters and click [OK] to temporarily store the setting.
Parameter
Description
Function
Select a function among the list in the following table.
Function setting
Set parameters required for the selected function.
CH name
Set a channel name using up to 16 characters.
CH comment
Set a description for the channel using up to 16 characters with the tag name, etc.
Number of decimal places
Set the number of digits after the decimal point in the values displayed as numeric
values in the Web browser view.
Select from 0 / 1 / 2 / 3.
Engineering unit
Set the engineering unit.
Can be set using up to 8 characters.
Initial value
Enter a value when the [Function] is disabled.
Memory at power loss
Select whether to hold a value immediately before the unit stops due to power failure or
reset of the unit. The held value is output when the unit is restarted.
This parameter is available for MA128 to MA159 only and when the [Function] is disa-
bled.
[Initial value] invalid when this function is enabled.
MA setting