194
DL30-G USERS MANUAL EM-8571-G Rev.2
3.13.3 Maintenance SW setting
By specifying the DI or MD channel in the [Maintenance SW setting], all the schedule outputs set to the chan-
nel can be disabled while the channel is ON.
(1) Click [Maintenance SW setting] button in the [Scheduler] to display the [Maintenance SW setting] window.
(2) Select the signal type and channel number.
Scheduler
1. Click
Maintenance SW setting
2. Enter
Set the parameters by referring to the table below.
Parameter
Description
Type
Select the signal type from: None / DI / MD.
CH
Select the channel number.
(3) Click [OK] to store the setting and return to the [Scheduler].