197
DL30-G USERS MANUAL EM-8571-G Rev.2
3.14.2 Setting analog data to process
Configure process operation monitor setting for Analog input (AI), Pulse input (PI), and Analog function register
(MA).
(1) Double-click the process number to set in the [Process operation monitor] window to display the [Process
setting] window.
(2) Select the signal type and channel to monitor for 'Channel 1'.
(3) Select the signal type and channel to display data value for each of 'Digital display (sub1) to 'Digital dis-
play (sub3)'.
Configuration
Process operation monitor
1. Click
Process setting
2. Double-click
3. Enter
4. Enter
(4) Set the parameters by referring to the table below.
Parameter
Description
Process name
Set a name of the process using up to 32 characters
Channel 1 Type
For setting analog data, select the signal type from AI, PI, and MA.
When AI, PI, or MA is selected for Channel 1:
- 'None' is automatically selected for 'Type' and 'Display comment' of Channels 2 to 5.
- The 'Color' and 'Name' fields of the alarm zones of the channel selected for Channel 1
are automatically uploaded to the 'Color' and 'Display comment' fields of Channels 1 to
5, respectively.
➔
3.6.2 Analog input (AI) > Alarm zone setting (AI)
➔
➔
3.6.5 Analog function register (MA)
Channel 1 CH
Select the channel to monitor.
Digital display (main)
'None' is automatically selected when AI, PI, or MA is selected for Channel 1.
Digital display (sub1) Type
Select from None, AI, PI, MA, DI, and MD.
Digital display (sub1) CH
Select the channel to display data value.
(5) The status of data set for Channel 1 is recorded every minute (00 seconds of DL30-G clock data) for 48
hours and represents the data in a Gantt chart.
➔