![background image](http://html1.mh-extra.com/html/m-system/dl30-g/dl30-g_user-manual_3103258284.webp)
284
DL30-G USERS MANUAL EM-8571-G Rev.2
8.2.5 Data file configurations
All data is saved first in the internal memory and then transferred to the SD card in the specific timings.
Data transfer to SD card
Data is not stored in the SD card unless each function is enabled.
Function
Data transfer timing
Transferred data description
Logging data
SD card recognized
*
All contents in the currently active internal memory block.
All previous memory blocks that were not transferred.
Every minute
Added data is sent when the storing rate set to Second or
Minute.
At the storing timing
Added data is sent when the storing rate set to Hour.
Event data
(Event log, System log,
Communication log, and
Schedule log)
SD card recognized
*
All contents in the currently active internal memory block.
All previous memory blocks that were not transferred.
Every minute
Added data is sent every minute.
Report form
(Daily report, Monthly report,
and Yearly report)
SD card recognized
*
All contents in the currently active internal memory block.
All previous memory blocks that were not transferred.
On the hour
Generated report data is sent.
*
Applicable also to the following cases:
When the power supply to the DL30-G is turned on while the SD card is inserted in the slot.
When an SD card is inserted to the slot (including when it is removed and then inserted again).