background image

HOBO® Temp Data Logger (UX100-001) Manual 

The HOBO Temp data logger records temperature in indoor environments with its integrated 
sensor. Using HOBOware®, you can easily configure the logger alarm to trip for specific high or 
low temperatures. Or, you can set up burst logging in which the logger records data at a different 
interval during certain conditions. The logger can also calculate minimum, maximum, average, and 
standard deviation statistics. This compact data logger has a built-in LCD screen to monitor 
temperature, logging status, battery use, and memory consumption in between readouts. 

Specifications 

Temperature Sensor 

 

Range 

-20° to 70°C (-4° to 158°F) 

Accuracy 

±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F), see Plot A 

Resolution 

0.024°C at 25°C (0.04°F at 77°F); see Plot A 

Response Time 

8 minutes in air moving 1 m/s (2.2 mph) 

Drift 

<0.1°C (0.18°F) per year 

Logger 

 

Logger Operating Range 

Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing) 
Launch/Readout: 0° to 50°C (32° to 122°F) per USB specification 

Logging Rate 

1 second to 18 hours, 12 minutes, 15 seconds 

Logging Modes 

Normal, burst, or statistics 

Memory Modes 

Wrap when full or stop when full 

Start Modes 

Immediate, push button, date & time, or next interval 

Stop Modes 

When memory full, push button, or date & time 

Restart Mode 

Push button 

Time Accuracy 

±1 minute per month at 25°C (77°F), see Plot B 

Battery Life 

1 year, typical with logging rate of 1 minute and sampling interval of 
15 seconds or greater 

Battery Type 

One 3V CR2032 lithium battery 

Memory 

128 KB (84,650 measurements, maximum) 

Download Type 

USB 2.0 interface 

Full Memory Download Time 

20 seconds 

LCD 

LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly 
or go blank in temperatures outside this range 

Size 

3.66 x 5.94 x 1.52 cm (1.44 x 2.34 x 0.6 in.) 

Weight 

23 g (0.81 oz) 

Environmental Rating 

IP50 

 

The CE Marking identifies this product as complying with all relevant 
directives in the European Union (EU). 

 

 

 

Plot A: Temperature Accuracy and Resolution 

Plot B: Time Accuracy 

HOBO Temp Data Logger 

UX100-001 

Included Items: 

 

Command™ strip 

 

Double-sided tape 

 

Hook & loop strap 

Required Items: 

 

HOBOware 3.4 or later 

 

USB cable (included with 
software) 

 

 

 

 

 

Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia
Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia
Phone: 021-8690 6777 (Hunting)

Fax: 021-8690 6777

Mobile: +62 816 1740 8925

Fax: 021-8690 6771

Summary of Contents for Onset HOBO UX100-001








Reviews: