M-system 73VR2102 User Manual Download Page 77 | Manualshive

Page: 77 / 94

background image

77

73VR2102 / 73VR2104 / 73VR2106 / 73VR2108 / 73VR2110 / 73VR2112 USERS MANUAL EM-7395-B Rev.24

While the CF card is hot-swapped or during the FTP while in recording, the indicators show the used volume of the
backup file in the internal memory. Percentage indication turns to green color.

Date / Time

Date and time is shown in black characters when the recorder is stopped, in green while recording.

9.2.2 DATA INDICATORS

Pen Assignment

Up to 16 pens are indicated in the Overview. Numbers of pens as specified in Display pen number (Section “5.3.6
DISPLAY PEN NUMBER”).

Analog Data

Analog data is indicated in bargraph with its tag name (no bargraph with 16-pen view). The bargraph color is set in
Analog Pen Setting (Overview color). When the signal is in alarm status, the tag name, momentary value and bargraph
color changes to the one specified in Analog Alarm Setting (Alarm color).

Discrete Data

Tag name and discrete data status is indicated. The status indicator tile at the bottom turns to the designated colors
according to each status. When the signal is in alarm status, the background turns to black color.

Tag name

Bargraph
Overview color

Alarm color

Momentary
value

Analog data.

Analog data in alarm.

Analog data (16-pen view).

Status indicator tile

Tag name

Discrete data.

Detail Monitor

More information can be displayed for a specific pen. Touch the data indicator you want to enlarge. Touch arrow keys
to show other pens.
Touching the enlarged area closes the detailed information.

ON alarm message
ON alarm triggered time
OFF alarm message
OFF alarm triggered time

Status indicators

Tag name

Tag name

Bargraph

Digital display

Alarm triggered
times

Detail monitor (analog and discrete).

Analog data is added with a momentary value in engineering unit. Alarm history is also indicated if the alarm setting
has been enabled. When the alarm is disabled, time index shows --/--/-- --:--:--.
Discrete data is also added with ON/OFF history data.

«
...
75
76
77
78
79
...
»

Summary of Contents for 73VR2102































































































Reviews:

No comments

Related manuals for 73VR2102

Brand: Raytech Pages: 18

Brand: QUBINO Pages: 2

Brand: E Instruments Pages: 2

Brand: X-laser Pages: 17

Dusty Harp Pickup Series

Brand: Dusty Strings Pages: 5

Brand: bentrup Pages: 9

Brand: Mic Pages: 2

Brand: PICO Pages: 2

RHEASREG KLSW-3

Brand: S+S Regeltechnik Pages: 32

Brand: NARDA Pages: 14

Brand: PCE Instruments Pages: 20

Brand: MFJ Pages: 9

Brand: Anslut Pages: 11

Brand: Silverline Pages: 2

Brand: Vega Pages: 24

Brand: Teledyne Analytical Instruments Pages: 44

efector300 SM0510

Brand: IFM Electronic Pages: 45

OIL INTENSIFIER SYSTEM

Brand: DH Instruments Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands