M-system 73VR2102 User Manual Download Page 92 | Manualshive

Page: 92 / 94

background image

92

73VR2102 / 73VR2104 / 73VR2106 / 73VR2108 / 73VR2110 / 73VR2112 USERS MANUAL EM-7395-B Rev.24

10.4 HOT SWAPPING THE CF CARD

The CF Card can be replaced while the 73VR21x is running.
The data sampled while the card is not placed is stored in the 73VR21x’s internal memory. Its capacity is enough
approximately for 5 minutes without a card. Be sure to get ready with a CF Card for replacement. If the CF Card
does not contain the files 73VR.VRD21, 73VR.VRP21, 73VR.VRC21, 73VR.VRM21 and 73VR.VRA21, they must be
created beforehand using the 73VR21BLD Configurator software. If the CF Card already has these files with stored
data, they will be overwritten.
Be sure to observe the following procedure. If not, CF Card and its data may be damaged or lost.

HOW TO REPLACE THE CF CARD

(1) Call up the Menu on the Display view and touch CF Card Eject key.
(2) Confirm that you want to remove the CF Card. If not touch Cancel.
(3) Confirm that the Menu now shows CF Card Insert key, and extract the card.

NOTE

No data retrieval or alarm history display is available while the card is removed.

(4) Insert a new CF Card, and touch CF Card Insert key.
(5) The 73VR21x will ask you if you want to reset the data file if one exist. Confirm that and touch OK.

CAUTION !

The CF Card cannot be removed while data in the internal memory is transferred to the card, during the card replace-
ment or after the recording is complete. It may take certain time.

CAUTION !

The 73VRWV can perform FTP transfer while the 73VR21x is recording.  The 73VR21x stores data in its internal
memory while the FTP is in progress.  When the internal memory is full, the file transfer is stopped, and the 73VR21x
starts transferring data from the memory to the CF Card.  Then with the transfer to the CF Card completed, the file
transfer to the 73VRWV is resumed. Due to this operating procedure, it usually takes longer time in a file transfer
when the 73VR21x is recording.

NOTE

Time elapsed (used file volume) since a card is removed can be confirmed on the Bargraph or the
Overview. The Data File Used Volume bargraph will indicated 100% after 5 minutes has been passed.
To use this function, choose Enable in the Display Setting.

NOTE

While the automatic comment entry is on, DO NOT execute a FTP data transfer.

«
...
90
91
92
93
94
»

Summary of Contents for 73VR2102































































































Reviews:

No comments

Related manuals for 73VR2102

Brand: AR Pages: 20

Brand: Idexx Pages: 6

Brand: IDEAL INDUSTRIES Pages: 10

Brand: M-system Pages: 5

Brand: VeEX Pages: 842

Brand: Power Measurement Pages: 20

Ocean Optics HR2000 Series

Brand: Halma Pages: 42

Brand: Roland Pages: 2

EUROGRAND EG2080

Brand: Behringer Pages: 34

TWIN LASER GB II

Brand: Nicols Pages: 22

Brand: IMI Hydronic Pages: 48

KLIMA GUARD 30.5010

Brand: TFA Pages: 22

Brand: Kobold Pages: 31

VIBRONET Signalmaster

Brand: Fluke Pages: 66

ALICAT SCIENTIFIC M

Brand: Halma Pages: 30

Brand: Teledyne Pages: 65

Brand: Compact Instruments Pages: 2

Brand: Ruide Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands