manualshive.com logo in svg

M-system 73VR2102, User Manual

Share
Download
M-system 73VR2102 User Manual Download Page 87

87

73VR2102 / 73VR2104 / 73VR2106 / 73VR2108 / 73VR2110 / 73VR2112  USERS MANUAL  EM-7395-B Rev.24

9.6  COMMENT HISTORY

Comments entered on the Record view are stored in the CF Card.  This data can be searched and displayed on the 
Comment History view.  When you touch the top part of the screen (enclosed in the frame), control keys appears.

Comment history.

9.6.1  DATA DISPLAY

The Comment History view shows the date/time and the comments in the group specific color.
Sixteen (16) events are listed on the view, and the maximum of 1000 events can be searched and displayed.
To the right top of the screen, the position of the presently selected comment among the total number of comments 
is indicated.
Max. 18 characters are displayed on the list.  When you want to read all characters of a comment longer than that, 
move the cursor to the comment row and touch the comment part.

9.6.2  DATA SEARCH BY COMMENT

Touching Jump key when a specific comment is selected switches the screen to the Retrieve view where the data at 
the moment of comment entry is indicated.

Summary of Contents for 73VR2102































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands