51
73VR2102 / 73VR2104 / 73VR2106 / 73VR2108 / 73VR2110 / 73VR2112 USERS MANUAL EM-7395-B Rev.24
n
PEAK HOLD (MAX) / PEAK HOLD (MIN)
Reset after a specified time duration
Reset by the trigger input signal
Reset by time of a day
Input (X1)
Touching Inp.1 opens the Tag name selector view. Select an input signal used for the operating function.
Caution !
Be careful to choose a pen of Not Itself. For example, you cannot choose Function Pen 1 or the last
data of Function Pen 1 to be used as X1 in an equation for Function Pen 1.
When assigning ‘last’ data sample to X1, specify also the initial value. Otherwise no data is recorded
for the first operating cycle.
Initial value
Initial value is used in the function operation cycle as default data sample when ‘last’ data is specified in an equation.
If you do not need, leave the field blank.
Initial value
Max. 6 digits including a decimal point and minus sign
Reset / Reset time
In order to reset the hold function, ‘Time’ or ‘Trigger input’ can be specified. Touch the left ‘None’ key for ‘Time,’ the right
key for ‘Trigger input’ conditions. If you leave the setting to ‘None,’ the data is reset only when ‘Start’ key is touched.
When ‘24 hours’ is specified, the reset time must be specified. Touch the current time specification and a numeric
keypad appears on the screen.
• ‘Reset by time’ selections
None
No resetting by time. Reset only when ‘Start’ key is touched.
30 min.
Reset at 0 minute and 30 minutes every hour
1 hour
Reset at 0 minute every hour
2 hours
Reset at 0 minute every even hours (0, 2, 4,...)
3 hours
Reset at 0 minute every three hours (0, 3, 6,...)
4 hours
Reset at 0 minute every four hours (0, 4, 8,...)
6 hours
Reset at 0 minute every six hours (0, 6, 12, 18)
12 hours
Reset at 0 minute every twelve hours (0, 12)
24 hours
Reset at a specified time of a day
• ‘Reset by trigger input’ selections
None
No resetting by trigger input. Reset only when ‘Start’ key is touched.
Up
Reset when the trigger input turns from OFF to ON.
Down
Reset when the trigger input turns from ON to OFF.
ON
Reset while the trigger input is ON.
OFF
Reset while the trigger input if OFF.
