M-system 73VR2102 User Manual Download Page 74 | Manualshive

Page: 74 / 94

background image

74

73VR2102 / 73VR2104 / 73VR2106 / 73VR2108 / 73VR2110 / 73VR2112 USERS MANUAL EM-7395-B Rev.24

Data File Used Volume

Data File Used Volume indicators are displayed above the MENU key when Data File Used Volume is set to ‘Show’
in the basic setting.
The 73VR21x creates a data file at the startup using all unused space and shows while recording how much space
has been used in percentage (1 percent increments) about Data (D), Alarm History (A) and C (Comment History). The
indicator colors change according to the used volume: green below 50%, yellow up to 79% and red over 80%. Once
the used space reaches 100%, the 73VR21x overwrites the oldest data with a new one. There will be no update on
this indicator after 100%.
While the CF card is hot-swapped or during the FTP while in recording, the indicators show the used volume of the
backup file in the internal memory. Percentage indication turns to green color.

Data file used volume indicator

Alarm history file used volume indicator

Comment history file used volume indicator

Data file used volume indicators

9.1.4 WRITING COMMENTS

Comments can be indicated on the screen in the Trend view.  These comments are also saved in Comment History
file to view on the Comment History view.
In order to write comments, three (3) methods are available:
1.  Selecting from a preset list of comments
2.  Writing a comment directly
3.  Writing a selected comment automatically by preset conditions
When ‘direct comment input’ is enabled, other methods are not available.
The maximum of 56 comments categorized in 7 groups (8 comments per group) can be preset.  The seventh group
is used also for free comment entry during recording.  The comments in this group can be modified while recording.

NOTE

Comment function can be used only (1) when the trend graph is showing a perpendicular chart, and
(2) when the 73VR21x is recording in the CF Card. No comment can be written in while you are
hot-swapping the CF Card.
While the automatic comment entry is on, DO NOT execute a FTP data transfer.

«
...
72
73
74
75
76
...
»

Summary of Contents for 73VR2102































































































Reviews:

No comments

Related manuals for 73VR2102

Brand: HANYOUNG NUX Pages: 4

Brand: jenway Pages: 30

Brand: National Meter & Automation Pages: 24

Brand: Lakeshore Pages: 2

Brand: Kamstrup Pages: 4

Brand: Bartington Pages: 15

Brand: Bartec Pages: 216

Brand: YOKOGAWA Pages: 2

POCKET COLORIMETER II

Brand: Hach Pages: 188

Brand: Unipulse Pages: 129

Brand: IDEAL Pages: 11

Brand: IDEAL Pages: 16

Brand: Vaisala Pages: 2

Brand: PICO Pages: 2

Brand: Sper scientific Pages: 12

Scuba MAXIMUS SRB3600 regulator

Brand: Sherwood Scuba Pages: 29

GRAND RHAPSODY PIANO

Brand: Waves Pages: 19

Brand: Oceanic Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands