M-system 73VR2102 User Manual Download Page 55

Page: 55 / 94

73VR2102 / 73VR2104 / 73VR2106 / 73VR2108 / 73VR2110 / 73VR2112 USERS MANUAL EM-7395-B Rev.24

LOGIC FUNCTIONS

Function

Choosing one of the available functions will change the rest of the parameter list to match the selected function.

Input (X1, X2)

Touching Inp.1 or Inp.2 opens the Tag name selector view. Select input signals used for the operating function.

Caution !

Be careful to choose a pen of Not Itself. For example, you cannot choose Function Pen 1 or the last

data of Function Pen 1 to be used in an equation for Function Pen 1.

Initial value

Initial value is used in the function operation cycle as default data sample when ‘last’ data is specified in an equation.
If you do not need, leave the field blank.

Initial value

1 for ON, 0 for OFF

Caution !

Any setting other than 0 and 1 will be handled as 0 as initial value.

For the XOR function, setting other than 0 and 1 to X1 or X2 will result in ‘0.’

OFF Description, ON Description

Short description for ON (1) and OFF (0) status for the operation result can be specified.

OFF description

Max. 5 characters

ON description

Max. 5 characters

ANEMOSCOPE

Input (X1)

Touching Inp.1 opens the Tag name selector view. Select input signals used for the operating function.

Caution !

Be careful to choose a pen of Not Itself. For example, you cannot choose Function Pen 1 or the last

data of Function Pen 1 to be used in a equation for Function Pen 1.

5.6 HARDWARE CONFIGURATION

The initial view for the Hardware Configuration setting is as shown below.

5.6.1 ADC SPEED

Choose from Fast, Slow and Medium. When 100 msec. storing rate is selected, there is no need of this setting.

5.6.2 LINE NOISE FILTER

Choose from 50/60 Hz, 50 Hz or 60 Hz. When 100 msec. storing rate is selected, there is no need of this setting.

Caution !

When the line noise filter setting is changed, measured values immediately after the change may

contain errors by the AD conversion cycle change. Wait for 10 seconds before resuming data record-

ing after it has been changed.

Summary of Contents for 73VR2102































































































Search results

Summary of Contents for 73VR2102

Reviews:

Related manuals for 73VR2102

Brands by name

Popular brands

M-system 73VR2102, User Manual

Search results

Summary of Contents for 73VR2102

Reviews:

Related manuals for 73VR2102

Brands by name

Popular brands