manualshive.com logo in svg

M-system 73VR2102, User Manual

Share
Download
M-system 73VR2102 User Manual Download Page 28

28

73VR2102 / 73VR2104 / 73VR2106 / 73VR2108 / 73VR2110 / 73VR2112  USERS MANUAL  EM-7395-B Rev.24

5.1.8  DATE AND TIME

Date / time is indicated in the format: YY / MM / DD  HH : MM : SS.
Touching the current time index replaces the screen with a numeric keypad.  Enter a correct time and touch OK.

CAUTION ! 

If incorrect date is entered, OK button turns grey and becomes disabled.

CAUTION !

After the clock has been rewound (e.g. from 10:02:34 to 10:00:00), a part of the data in Data file, Comment history file 
and Alarm history file will be deleted in certain conditions as explained in the following.  They are not deleted when 
the clock has been forwarded.
1.  When you touch Start button, a warning dialog box will appear if the clock shows the time earlier than the last 

data’s time index in the data files.  When you touch OK, the data will be deleted.  If you touch Cancel, no data will 
be deleted but recording is stopped.

 

With the remote trigger, event recording or time specified storing mode, data will be deleted not at the moment of 
Start, but at the moment of the trigger (or the specified time).

2.  With Hot Start setting, data will be deleted without warning if the clock shows the time earlier than the last data’s 

time index in the data files when the data recording has been started automatically.

3.  When the recorder is started remotely by the 73VR21BLD or MSR128, data will be deleted without warning if the 

clock shows the time earlier than the last data’s time index in the data files.

5.1.9  PASSWORD

Password setting prevents unauthorized access to data displays and changes in the setting.  When you have set a 
password and returns to one of the Display views, the password will be requested every time you touch a control key 
on the screen.
Once the password lock is released, you can access control keys and move to other views including Config.

Password

Max. 6 alphanumeric characters

CAUTION !

The password lock function is valid only on the Display view (Trend, Overview or Bargraph).  If another view is left open 
in unlocked state, anyone can change its setting.
If you forgot your password, please contact M-System.
The following functions are available without needing a password:

• Switching Pages within the same function view.
• Updating digital displays
• Zooming in a digital display

5.1.10  IP ADDRESS

In order to connect the 73VR21x to a PC via Ethernet when using the 73VR21BLD (Builder) or the 73VRWV (Data 
Viewer), set an appropriate IP address.
Touching the current selection of the IP address replaces the screen with a numeric keypad.  Enter a desired IP ad-
dress on the keypad and touch OK.

IP address

Factory default setting: 192.168.0.1

CAUTION !

In order to apply new IP address setting, the 73VR21x must be restarted.  Be sure to return to one of the Display views 
to save the new setting.  All new setting will be lost otherwise.
Consult your network administrator for IP address.

Summary of Contents for 73VR2102































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands