M-9500-3.0.6-0 INTEGRA 9500-9505 Operations Manual – English
Approved
: Spike Reed
Effective:
15 Nov 2010
Supersedes:
28 Jan 2010
LVS®
CONFIDENTIAL
All contents copyright © LVS® 2010 Page 24 of 82
System Settings
Minimum Passing Score
There is a PASS/FAIL mode of operation used to simplify barcode verification
(this is explained in more detail in the section entitled
Pass / Fail ISO Grading
in
the
Grading Tab
section). This is where the minimum passing score is selected.
Days before password expires
Use the arrow keys to select the number of days before the current password
expires. As soon as you use the arrow keys, the checkbox will automatically be
enabled.
Minutes before auto logoff
An automatic “Logoff” feature is set by clicking on the box and then choosing a
period of time desired to make the system automatically log off after that period
of time. Choosing
n/a
causes this feature to be turned off.
Recalibration Cycle
It is important to calibrate the system over a period of time. This feature sets up
the desired number of days between system calibration. When the period of time
has been reached, the software will not allow you to continue until calibration has
been completed.
System Settings
