background image

M-9500-3.0.6-0 INTEGRA 9500-9505 Operations Manual – English 

 
 

Approved

:  Spike Reed                 

Effective:

 15 Nov 2010

                   Supersedes: 

28 Jan 2010

   

LVS®

 

CONFIDENTIAL

           

All contents copyright © LVS® 2010                             Page 7 of 82

 

 

 

equipment using electrical voltages may cause personal injury if 
improperly handled.   

  Do not attempt to work on the system with the main power lines 

connected.  

  Ensure that the AC power source matches the ratings listed for the 

system. If unsure, check with your dealer or local utility provider.  

  Do not place the AC power cord where it can be stepped on. If the AC 

power cord becomes damaged or frayed, replace it immediately.  

  Avoid looking directly into any system lights.  If you need to examine the 

lights, or look at any component near the lights, be sure to first turn off the 
lights. If the lights cannot be turned off, then wear polarized sunglasses 
while examining the lights.  

  To avoid damaging the system, turn off and unplug the system before 

cleaning. 

  If the system ever needs repair, consult Label Vision Systems or your 

LVS® Distributor. 

Summary of Contents for integra 9500



















































































Reviews: