M-9500-3.0.6-0 INTEGRA 9500-9505 Operations Manual – English
Approved
: Spike Reed
Effective:
15 Nov 2010
Supersedes:
28 Jan 2010
LVS®
CONFIDENTIAL
All contents copyright © LVS® 2010 Page 40 of 82
Figure below). If it matches the decoded barcode information, the software
reports a “Match”.
The system supports OCR-A, OCR-B, Times New Roman, Arial, Courier,
and most Sans-serif fonts. Upper case only. Special characters are not
supported.
If the software cannot read the characters correctly, place the mouse
cursor over the Human Readable box and click on the mouse. The
software then reports what it sees in a small pop-up window. Since the
software was unable to read the characters, it would have no idea if the
characters were alpha or numeric. Thus, the software shows the user both
alpha and numeric data.
The human readable of a barcode can be checked most of the time
provided the characters do not touch each other. The characters must also
be large enough to read and in a straight line. The system is limited to
reading up to 24 characters.
The green box used to identify what
OCR characters are to be validated.
Draw a green box
around the human
readable characters
The software reports a
“match” if the human
readable characters
match the decoded
barcode information.
