manualshive.com logo in svg

LVS integra 9500, Operation Manual, Page: 37 / 82

Share
Download
LVS integra 9500 Operation Manual Download Page 37

M-9500-3.0.6-0 INTEGRA 9500-9505 Operations Manual – English 

 
 

Approved

:  Spike Reed                 

Effective:

 15 Nov 2010

                   Supersedes: 

28 Jan 2010

   

LVS®

 

CONFIDENTIAL

           

All contents copyright © LVS® 2010                             Page 37 of 82

 

 

 

Grading Tab 

 
Because parameters are different for each of the families of codes, please refer 
to the separate sections that follow in this manual. 
 

Section 1: 1D Codes 

 

 

 
The Grading tab (see Figure above) is divided into the following sections: 

 

1. Overall Grade 

2. ISO Grading 

3. View 

4. Grade bar graph 

5. ISO/IEC Parameters 

6.  Blemish (note that Blemish is not an ISO grade and is for informational 

purposes only).  

 

Each section is described in the following pages.  

 

1 

2 

3 

4 

If a barcode has 2 
components, click either the 
1D or 2D radio buttons to 
switch between the linear and 
composite portion results. 

5 

6 

Summary of Contents for integra 9500



















































































Reviews:

No comments