M-9500-3.0.6-0 INTEGRA 9500-9505 Operations Manual – English
Approved
: Spike Reed
Effective:
15 Nov 2010
Supersedes:
28 Jan 2010
LVS®
CONFIDENTIAL
All contents copyright © LVS® 2010 Page 43 of 82
5. ISO/IEC Parameters Section
This section lists all of the measured parameters individually. These parameters
are used to determine why a barcode has a certain grade. There are numerous
parameters listed, depending on the symbology. Use the scroll bar to view the
entire list of parameters (see Figure below).
At the top of this section is an information box that displays the decoded data.
This data does not contain any stop, start, or control (non-printable) characters.
Check digits may or may not be displayed depending on the symbology. For
example, Code 128 mandates that they not be transmitted. The software always
displays the check digit for symbologies that make the transmission of check
digits optional. To see special characters or check digits, refer to the
Structure
tab chapter covered later in this manual.
Below the encoded barcode data, but still within the information box, is a Product
Identification name for all UPC-A, UPC-E, EAN-8 and EAN-13 barcodes that are
contained within the Product Identification data file (see
Setup Tab
|
System
Settings
|
Product Identification (Lookup) File
for more information).
List of
Parameters
Decoded
Data