background image

M-9500-3.0.6-0 INTEGRA 9500-9505 Operations Manual – English 

 
 

Approved

:  Spike Reed                 

Effective:

 15 Nov 2010

                   Supersedes: 

28 Jan 2010

   

LVS®

 

CONFIDENTIAL

           

All contents copyright © LVS® 2010                             Page 21 of 82

 

 

 

15. Laetus  Pharmacode 
16. MIL-STD-130M 
17. Miniature  Pharmacode 
18. Multi-rotation Data Matrix 
19. Multi-rotation QR Code 
20. PZN-big (German Pharmacode) 
21. PZN-normal (German Pharmacode) 
22. PZN-small  (German  Pharmacode) 

 

 

 

Important note about Automatic GS1 or ISO Application standard:  

When selecting the Automatic GS 1 or ISO standard, the following message 
appears. You must read the message, enter OK in the text field, and then click 
OK.  

 

 

The aforementioned Application standards vary according to specific industry 
norms. Failure to use the correct standard causes the final grade to be incorrect. 
When no Application standard is specified, the ISO/IEC 15415/15416 should be 
used. 

Selecting an Application Standard 

1.  Select an Application standard from the drop-down box, or click the 

Configure available standards

 button to view the entire list of Application 

standards (see Figure below). 

 

 

Summary of Contents for integra 9500



















































































Reviews: