background image

M-9500-3.0.6-0 INTEGRA 9500-9505 Operations Manual – English 

 
 

Approved

:  Spike Reed                 

Effective:

 15 Nov 2010

                   Supersedes: 

28 Jan 2010

   

LVS®

 

CONFIDENTIAL

           

All contents copyright © LVS® 2010                             Page 52 of 82

 

 

 

1. Overall Grade 

The system is defaulted to show the Overall Grade.   
 

2. Defects 

This feature indicates cells that are the wrong side of the global threshold (i.e. 
a cell intended to be white is interpreted as black; a cell intended to be black 
is interpreted as white. The software also detects cells that are not in the 
correct spot or have a blemish. When this occurs, error correction is used and 
causes the software to highlight the cells in red where error correction was 
applied. 
 

3. Zoom 

Data Codes are often very small. The Zoom feature is used to magnify the 
image for easier visual inspection (see Figure below). 

 

 

 

 

 

Note:  

If the Zoom feature, along with either the Modulation, Defects, or 

OCR feature, are checked and a Verification Report is printed, the thumbnail 
view on the report shows the results in color according to the legend at the 
bottom of the screen (see Figure below).   
 
 

The Zoom feature 
magnifies the image 
for easier visual 
inspection. 

Summary of Contents for integra 9500



















































































Reviews: