M-9500-3.0.6-0 INTEGRA 9500-9505 Operations Manual – English
Approved
: Spike Reed
Effective:
15 Nov 2010
Supersedes:
28 Jan 2010
LVS®
CONFIDENTIAL
All contents copyright © LVS® 2010 Page 70 of 82
Import Image from File
A saved image can be reloaded into the system by choosing the
Import Image
from file
button. You can then go to the
Grading Tab
screen or any other screen
and work with the image.
WARNING:
When loading an imported image, the
system’s internal camera is automatically turned
Off. After work is completed with the imported
image, the internal camera must be manually turned
back on. Go to the Setup Tab Screen and turn
the internal camera back On (see Figure to the
right).
Export Image to File
The actual image used to generate a verification report is not saved. A thumbnail
image, however, is saved with the report. Sometimes it is important to save the
actual image. This can be done by placing a barcode label into the field of view,
verify the label, then go to the
Archive Tab
screen and push the
Export Image
to File
button. The image is now saved.
Recent Reports (Last 30 Days)
You can recall any report from the archive. When you do, the data is the same as
it was when the report was generated with the exception of the current date/time
being attached on the bottom of the report.
For reports older than 30 days, you must enter the proper software commands
using SQL language into the “Query” box. For those who may not be accustomed
to SQL commands, the software has made it easy to use. For instance, by
choosing “Recent Reports” the Query box might contain the following command:
Select ReportsID.ImageID.LocalTime From Reports Where
LocalTime>=#23-Apr-2005 11:25# Order By ReportID
Camera switch located
on the Setup Tab
Screen.
The Query box and Execute Query Box
