LvSwitch IPPBX 3000 Manual
90
Advanced setting
Figure 6-27 Advanced setting of PRI trunk
Advanced setting items description as following
Table 6-8 Advanced setting description
ITEMS
Description
Relay fault determination
When the relay fault duration reaches the set value, the fault
message will be sent to the corresponding incoming relay. After
the recovery of the relay fault, when the normal operation
reaches the value, the corresponding relay service will be
informed to start.
Relay on busy processing
Hang up directly or send busy signal
Receive the alerting message
Options: send back the ringtone or not send back the ringtone
Modify/delete PRI Trunk
In the "PRI trunk" list, click a certain PRI trunk that you want to modify, click the
button, and modify the
setup information of designated PRI relay in the popup interface;
Select a PRI relay you wish to remove from the PRI relay list, click the
button, and confirm that the
designated PRI relay can be removed.
Add R2 trunk
Before setting, PCM needs to be enabled, and the parameters need to be consistent with the opposite end.
Select "CAS" for the frame, and generally keep the default values for other parameters. Click < add > button
in R2 relay bar, and the page shown in figure 6-31will pop up.
The interface items as following:
Summary of Contents for IPPBX3000
