LV switch IPPBX3000, User Manual

Page: 189 / 195

LvSwitch IPPBX 3000 Manual
187
There are two ways to set the system time. Obtain time through internet and manually set the system time. By
default, the product obtains the time through NTP server.
Network Time Protocol (NTP) is used to provide time synchronization between routers, switches, and
workstations. The function of time synchronization is to look at the related event records of multiple network
devices to help analyze more complicated faults and security incidents.
NTP server to obtain time in two ways:

When the product is connected to the Internet, it automatically obtains the time from the default NTP
server of the device (this method is adopted by default).

Enter the specified NTP server address, the product obtains the time from the specified NTP server.
Figure8- 14 Time Settings
System Basic Configuration Page description:
Table8- 3 Time Configuration
Item Description
Enable NTP Time Zone
Check to enable NTP service function. The default value
is Enable.
Time zone
Select the time zone of the product, the default is GMT +
08: 00 China standard time.
Time server
Automatic: Update the time from the default NTP server.
Manual: If you need to set other NTP server, select
"Manual", set NTP server, the product will update time
from the specified NTP server.
The default is automatic.
NTP Server 1 / NTP Server 2 In manual mode, you can manually set 2 NTP servers