LV switch IPPBX3000, User Manual

Page: 187 / 195

LvSwitch IPPBX 3000 Manual
185
Item Description
(Simple Network Address Translation) mechanism, so
that the ACS can configure and manage the product.
By default, STUN status is “Disable”. After selecting
“Enable”, the page shown in Figure 10-10 is displayed.
The configuration items are described as follows.
STUN server address
Address of the STUN server
STUN Server Port
The port number of the STUN server.
Minimum Retention Time of
STUN Connection The minimum holding time for the client to establish a
connection with the STUN server.
STUN Username
User name used to log in to the STUN server.
STUN Password
Password for logging in the STUN server.
Request Upload
Click <Upload> to request to upload the device
configuration to ACS server, The sending result of the
request will pop-up on the right side.
The CPE refered in this manual is the 1800 device. ACS server
address is provided by the telecommunications, make sure the
port number and URL address must be correct.
10.7 Reboot
Select “System > Reboot”. The Reboot page is displayed as shown in Figure 8-11.
Figure8- 11 Reboot Page
Click <Confirm Reboot> to reboot the system.

Do not power off during resboot.

Network communication will be temporarily
interrupted during resboot.
10.8 Restore Factory Default
Run Restore Factory Default, all the setting information of the product will be deleted and return to the
factory default configuration status. This function is generally used when the equipment is changed from one
network environment to another different network environment. The device is restored to the factory default
configuration and then reset to better suit the current networking.
Select "System > Restore" and go to " Restore" page as shown in Figure8-12.