LvSwitch IPPBX 3000 Manual
94
Name
Function Description
Type of Point Code
Select "14 bit" as the signaling point coding type for the international NO.7
signaling network
；
Select "24" bit, which is the signaling point coding type of
NO.7 signaling network in China. The default value is "14 bits"
。
Source Point Code
The source point code represents the information source signaling point code,
and the signaling point code of the product is the source point code.
。
OPC
：
The source point code is provided by the operator and the format is
generally
：
xxx-xxx-xxx
，
Corresponding to the above figure OPC1-OPC2-OPC3
。
Where xxx is a number in the range 0~255 (decimal) or 0~FF (hexadecimal)
，
This product only supports decimal mode. If the assigned point code is in
hexadecimal format, please convert it to decimal before configuring
。
Destination point code 1/2
The destination point code is the signaling point code of the docking device and
is provided by the other party.
The format is generally: xxx-xxx-xxx, corresponding to the above figure
DPC1-DPC2-DPC3
。
Where xxx is a number in the range of 0~255 (decimal) or
0~FF (hexadecimal). This product only supports decimal mode. If it is in
hexadecimal format, please convert it to decimal before configuring
。
DID Number
In the drop-down box, select the outgoing number of the branch. The default
value is
“
None
”
. Generally, select
“
DID Number 1
”
.
。
Select Network
Provided by ISP
，
The options are national, international, national backup, and
international backup. The default value is
“
national
”
.
。
Calling Nai
Provided by ISP
，
Select the attribute of the calling number from the drop-down
box. The option has a national number, spare, a national backup, and an
international number. The default value is
“
national number
”。
Called Nai
Provided by ISP
，
Select the attribute of the called number from the drop-down
box. The option has a national number, spare, a national backup, and an
international number. The default value is
“
national number
”。
FISU
Select the status of FISU, the option has free, timing, the default value is "free".
FISU
（
Fill-In Signal Unit
，
Fill signaling unit to fill signaling unit
）
Is SS7 information
sent in both directions when other signaling units are not present.
。
The padding
signaling unit provides a CRC check for the use of two signaling endpoints and is
used for both signaling endpoints
。
Route Group
In the drop-down box, select the home route group by default. The default is
defaul route group.
。
Message Priority
North America is used to identify message priority (0~3, 3 highest)
，
message
priority is only used when network congestion occurs
，
It does not affect the order
of normal message transmission. When the network is congested, low-priority
messages will be discarded. For example, the signaling link test message has
higher priority than the call setup message.
；
This field is free in Europe
。
Call Transfer - Display
original caller
Select "Yes" to enable caller ID on this trunk
；
Select "No" to turn off Caller ID on the trunk. The default value is "Yes"
。
Fax
Select "Yes" to enable the fax function on this trunk
；
Select "No" to turn off the fax function on the trunk. The default value is "No".
。
Select < Select Circuit> to pop up the interface as shown in Figure 6-29.
Summary of Contents for IPPBX3000
