LV switch IPPBX3000, User Manual

Page: 60 / 195

LvSwitch IPPBX 3000 Manual
58
IPsec policy By setting up the IPsec policy, a secure channel is
established between the local end and the opposite end.
Policy name Enter the policy name,1-32 characters long
Policy status Enable or disable
Connection type Lan to Lan: The connection between two equipment
Remote access:Connection between PC with the
product
Interface Specify the interface of the secure channel,default is the
WAN 5
Remote address Specifies the opposite address of the secure channel
connection, which can be set to an IP address or domain
name
Local Subnet Specifies the local network segment for the safe
channel.
Remote Subnet Specifies the opposing network segment for the safe
channel.
IKE(Internal key exchange) description as below:
Table 5-13 Internal key exchange
Interface items Description
IKE(Internal key exchange) Configure IKE, which uses two phases to
negotiate and establish the key for IPsec SA.
Exchange mode When it is the first phase for exchange, the
optional mode “Main” or “ Aggressive” .The Main
difference between the Main and Aggressive
pattern exchanges is that the Aggressive exchange
provides no identity protection and exchanges
only three messages. In cases where identity
protection is less important, using Aggressive
mode can speed up negotiations. In situations
where identity protection is high, use the Main
mode.
Exchange mode When it is the first phase for exchange, the
optional mode “Main” or “ Aggressive” .The Main
difference between the Main and Aggressive
pattern exchanges is that the Aggressive exchange
provides no identity protection and exchanges
only three messages. In cases where identity
protection is less important, using Aggressive
mode can speed up negotiations. In situations
where identity protection is high, use the Main